The rolling mill in Dabrowa-Gornicza (Poland) has been regularly upgrading his sheet pile’s portfolio. The mill’s area of expertise is 600 mm wide U-type sections.
The brand new section available for shipment is the GU 28N. All the steel grades from EN 10248 can be supplied, from S 240 GP up to S 430 GP, and even the internal specification S 460 AP.
Similarly to the GU 18N and GU 22N, the thickness of the flange combined with the “reinforced shoulders” makes this new GU 28N an excellent section for reuse and for driving into very hard soils.
The GU 28N can also be rolled-up and rolled-down by 1.0 mm: the GU 30N and GU 27N.
Crimping properties, maximum rolling lengths and delivery conditions are the same as for the rest of the sheet pile sections from Dabrowa.
The next challenge that will be tackled is the GU 32N that will be available shortly.
|t||thickness of flange|
|s||thickness of web|
|G||mass per m2 of wall|
|Iy||moment of inertia|
|Wel||elastic section modulus|
Characteristics of the GU 28N range
For more information, please contact us at email@example.com
or visit our webpage: http://sheetpiling.arcelormittal.com/page/index/name/usections
Released on April 24 , 2014